How it works
We grind the slab, apply a densifier, and refine the surface with finer and finer diamonds. The number of passes is what sets the final look, and this walkthrough of the polishing grit sequence shows how each step builds on the last.
Why choose polish
No coating to peel and very little maintenance.
Spaces
Shops, offices, homes and storefronts.
Will stains come out?
Some do; others become part of the character.
How shiny?
You choose the sheen.
Shops on acreage
Some Antioch properties have detached shops with big slabs. Polishing them gives a durable, dust-free floor for tools and equipment without the cost of a full coating.
Maintenance
Dust mop and damp mop with a neutral cleaner. A fresh guard coat every few years keeps it looking new.
Matte or gloss
Lower grits give a satin look; higher grits give a mirror shine.
Clean, simple, durable
Polish is also a good fit for a detached hobby barn where the owner does not want to worry about a coating chipping under heavy equipment.
Polished concrete for Antioch homes, shops and offices
Polished concrete is a good fit for spaces that need a durable, low-maintenance floor without a coating that could peel. We see it in detached shops on larger lots in Antioch, in offices and warehouses, and in some modern homes where owners want a clean, industrial look.
How the slab affects the result
Every slab polishes differently. Some show more aggregate, some stay creamy and smooth. Clay soil cracks will remain visible after polishing, though we can fill them. We often polish a small test patch so you can see what your concrete will look like.
Questions about polished concrete in Antioch
How long does it take? A typical garage or small office takes two to three days, depending on the finish level.
Can you color it? Yes, with dyes applied during the polishing process.
Is it slippery? A polished floor is usually no more slippery than sealed concrete when dry. Wet floors need care, like any smooth surface.
Daily care
Dust-mop often and wash with a neutral cleaner. Grit dulls the finish over time, so walk-off mats at doors help a lot. A professional burnish every so often brings the shine back up.
Dyes and decorative cuts
Saw-cut borders or simple dye patterns can be added during polishing if you want some design.
Polished concrete for salons, shops and offices
Polished concrete is a simple, durable floor for Antioch salons, offices, shops and restaurants. It uses the slab that is already there, so there is no coating to peel, and it reflects light to brighten a room.
The process
We grind the slab with a series of diamond tooling, apply a hardener, and polish up to the level of shine you want. A protective guard goes on at the end to help resist stains from hair dye, food, oil or drinks.
What to expect from your slab
Each slab polishes differently. Some reveal aggregate, while others stay smooth and plain. Cracks, old patches and cut lines remain visible. We can grind a test spot so you know what you are getting.
Salons and wet areas
In salons, spilled dye and water are common. A polished floor with a guard resists stains, and a lower sheen can help with footing. Quick cleanup is still the best defense.
Daily cleaning
Dust mop daily and clean with a neutral cleaner. Skip acidic products that can dull the shine. Entry mats help keep grit from scratching the surface.
Scheduling
Polishing creates little mess when done with dust collection. We can work in sections or after hours to keep your doors open.
Retail and showroom spaces
Shops and showrooms in Antioch shopping centers often have slabs under old carpet or tile. Once that is removed and the adhesive is ground off, polishing can turn the slab into a durable finished floor that suits display racks and heavy foot traffic.
Edges and corners
Walls, door frames and columns need hand tools to reach. We take care with these edges so the sheen stays even across the whole room instead of fading near the walls.
Ask about polishing
Call (925) 350-7154.