Epoxy Countertops in Antioch, CA

Antioch grew fast from the 1980s into the 2000s, and a lot of those houses still have the builder-grade counters they were sold with: square-edge laminate, white tile with dark grout, or a cultured-marble vanity. Our crew resurfaces countertops in Antioch, CA with poured resin, bonding a new seamless top right over the old one.

(925) 350-7154

Get a Free Estimate

Tell us about the floor. Only your name and phone are required.

Form powered by splitforms

Gray stone-look resin countertop on a kitchen island in an Antioch, CA home

From builder-grade to custom

When southeast Antioch, the Deer Valley corridor and the neighborhoods off Lone Tree Way were filling in, kitchens were built to a budget. Twenty or thirty years later the cabinets are often still solid while the tops are chipped, stained or just dated. Full replacement means pulling the sink and cooktop, templating, a fabrication wait and a second install day. A resin pour skips nearly all of that.

We clean and sand what you have, fill any grout lines or seams, and then build up layers of tinted and clear resin until the surface looks like a single slab. The finished thickness is only about an eighth of an inch above the old surface, so it does not change your cabinet height or backsplash line.

Popular looks in Antioch homes

Calacatta-style white with bold veins brightens kitchens in homes with darker oak or cherry cabinets. Concrete gray and charcoal stone looks hide dust and suit the farmhouse and industrial styles many owners are moving toward. Pearl and copper metallics make a strong statement on a bar or island, and they come from the same pigments we use for metallic floors. We make a sample board with your colors before the pour so there are no surprises.

Grout lines on an old tile counter being filled before resin coating in Antioch, CA

Heat, the Delta breeze and curing

East County summers are long and hot, with afternoons regularly in the upper 90s or higher and a cooling breeze off the Delta at night. That swing matters for resin. Too much heat speeds up the reaction, shortening working time and making smooth veining harder. Cool, damp air slows it down. We schedule pours for the cooler part of the day in summer, ask you to keep the AC steady for several days, and avoid open doors and fans that could blow dust or insects onto a wet surface.

Our process, start to finish

  • Day one: repair loose sections, fill grout lines, sand, mask the kitchen, prime and lay the base color.
  • Day two: pour and design the decorative layer, then a clear flood coat; drips at the edges are managed as they form.
  • Day three: sand the drip edges smooth, fix any small flaws, remove masking and walk through care with you.

Plan on light use after about 72 hours and normal kitchen use after roughly a week.

Where epoxy is and isn't the right call

Resin is a strong choice for interior kitchens, baths, bars, home offices and laundry rooms. It is less suited to a fully exposed outdoor kitchen in Antioch's summer sun, because UV and heat cause resin to yellow and soften over time. For a backyard bar under a solid patio cover, a UV-stabilized resin can work; for open-sun counters, we will point you toward other materials. Inside, keep hot pans on trivets and cut on boards. Daily cleaning is just mild soap and a soft cloth.

Matching the rest of the house

Because we are a floor coating company first, many Antioch clients pair new counters with a coated garage or a sealed patio slab. If the garage is your next project, see our garage floor epoxy service, and for outdoor concrete, our concrete sealing work.

What drives the price

We price by the job, not a one-size rate. The main factors are total square footage, how many exposed edges and corners need hand finishing, whether a backsplash or waterfall end is included, and how much repair the existing top needs before the base coat. A small vanity can often be done in a single visit, while a large island with a breakfast bar takes the full three days. Because there is no demolition, no fabrication shop and no plumber needed to reconnect the sink, the total usually comes in well under new stone.

Serving East Contra Costa County

We work across Antioch, from older homes near Rivertown and the waterfront to newer subdivisions on the south side of town, and in neighboring Pittsburg, Oakley and Brentwood.

Common questions

Can you coat a cultured-marble vanity?

Yes, if it is sound. We sand it thoroughly so the new resin bonds, and we mask around the integral bowl if you want to keep it.

Will the old tile pattern show through?

Not if the grout is filled and a solid base coat goes down first, which is part of every tile job.

How long will it last?

With trivets and cutting boards, a well-poured top looks good for many years, and a fresh clear coat can renew it later.

Want new counters without a demolition?

Call (925) 350-7154 to book a visit. We will check your existing tops, show you color boards and give you a written price.